Dell Update Package 6.2 (BLD_288)
Copyright (c) 2003-2009 Dell, Inc. All Rights Reserved.
Release Title:
Seagate Seagate 3.5", 15K6, SAS, 146GB, DU, Seagate 3.5, 15K6, SAS, 300GB,
DU, Seagate 3.5", 15K6, SAS, 450GB, DU, v.HS0F, A05

Release Date:
September 09, 2009

Default Log File Name:
R230278

Description:
This release contains firmware version HS0F for Seagate 15K.6 (3.5" 15K.6
SAS) 146GB, 300GB and 450GB Hard Drives. Dell Part numbers XX518, FM501,
and YP778. Vendor model numbers ST3450856SS, ST3300656SS and ST3146356SS.

Supported Device(s):
Seagate 3.5", 15K6, SAS, 146GB, DU
Seagate 3.5, 15K6, SAS, 300GB, DU
Seagate 3.5", 15K6, SAS, 450GB, DU

Fixes / Enhancements:
Various fixes/Enhancements including:

Performance Enhancements
•	Performance improvements to 4KB random reads


Important Device Information:
* Do not run other applications while executing Dell Update Packages.

* The software contained in a Dell Update Package for Linux is an aggregate
of third party programs as well as Dell programs.  Use of the software is
subject to designated license terms.  All Software that is designated as
"under the terms of the GNU GPL" may be copied, distributed and/or modified in
accordance with the terms and conditions of the GNU General Public License,
Version 2, June 1991.  All software that is designated as "under the terms
of the GNU LGPL" (or "Lesser GPL") may be copied, distributed and/or modified
in accordance with the terms and conditions of the GNU Lesser General Public
License, Version 2.1, February 1999.  Under these GNU licenses, you are
also entitled to obtain the corresponding source files by contacting Dell at
1-800-WWW-DELL.  Please refer to the Open Manage Open Source DVD.  There may
be a nominal fee charged to you for the physical act of transferring a copy.

* If the following error occurs, "Error while loading shared libraries:
libstdc++.so.5: cannot open shared object file: No such file or directory",
you must install the compatibility libraries from the OS vendor repository
or from the OS installation media. To install the compatibility libraries,
use the following command: "RPM -ih compat-libstdc++-33-3.2.3-47.3.i386.rpm"

* When Update Packages stop abruptly due to a power outage or abnormal
termination, perform the following steps:
   - Remove the lock file.
     Type the following command: rm -f /var/lock/.spsetup
   - Run the Update Package again to reapply the update.

* Do not run storage controller update packages if the controller is in use
by other applications.

  The firmware upgrade may fail if any of the RAID controllers in the system
  are performing an I/O background task (that is, consistency check, background
  initialization, rebuild, or reconstruction). Allow the background task to
  complete before attempting to upgrade the firmware. Patrol Read tasks will
  not affect a firmware upgrade.

* Linux systems running one or more applications that interact with SCSI
devices in certain ways are known to cause a kernel panic situation. Therefore,
it is recommended that you stop Server Administrator and its Storage Management
Service before running storage controller firmware update packages.

  To stop the Dell OpenManage(TM) Server Administrator service,
  run "omconfig system webserver action=stop"

  To start the Server Administrator service,
  run "omconfig system webserver action=start"

  To stop the Server Administrator Storage Management Service,
  run "/etc/init.d/dataeng stop"

  To start the Server Administrator Storage Management Service,
  run "/etc/init.d/dataeng start"